Competition Archery Media Announces 2019 Schedule

Competition Archery Media has solidified its 2019 schedule to bring to the public professional coverage of the biggest and best archery competitions across the United States. CAM will partner with the National Field Archery Association (NFAA) to provide additional coverage of The Vegas Shoot and Indoor World Series Final; and the NFAA Indoor Nationals. CAM also will provide exclusive coverage of USA Archery competitions in 2019, in addition to the full season of Archery Shooters Association (ASA) events, to include the ASA Winter CanAm Classic.

CAM_Red (1)

CAM is a company of professionals who have decades of experience providing television broadcast coverage of professional and amateur sports events, including archery.

Following is CAM’s 2019 schedule of events. Tournaments highlighted in bold text will feature live coverage of final shootdowns or medal matches. Other events will feature taped, daily summary shows, scoring updates, photo galleries and more.

* Lancaster Archery Classic, Jan. 25-27, Manheim, Pa.

* The Vegas Shoot, Feb. 8-10, Las Vegas, Nevada

* ASA Hoyt Archery Pro/Am, Feb. 21-24, Foley, Ala.

* 2019 ASA Winter CanAm Classic, March 7-10, Verona, N.Y.

* USA Archery National Indoor Final, March 15, Cincinnati, Ohio

* NFAA Indoor Nationals, March 15-17, Cincinnati, Ohio

* ASA New Breed & Black Eagle Pro/Am, March 21-24, Mitchell, Ala.

* USA Archery Arizona Cup, April 5-7, Phoenix, Ariz.

* ASA Easton Southwest Shootout, April 25-28, Paris, Texas

* Western Classic Trail Shoot and NFAA Marked 3D Championships, May 3-4, Redding, Calif.

* ASA TRUBall/Vortex Pro/Am, May 16-19, Augusta, Ga.

* USA Archery Gator Cup, May 31-June 2, Newberry, Fla.

* ASA Mathews Pro/Am, June 20-23, London, Ky.

* McKenzie ASA Classic, Aug. 1-4, Metropolis, Ill.

* USA Archery Outdoor Target Nationals, Aug. 14-17, Dublin, Ohio

For more information about CAM, visit our website.

What archers need to know about cam timing

Cam timing is one of those critical aspects of compound bow tuning that every archer should know. It could be the evil demon that’s responsible for those seemingly unexplained fliers you’re seeing from time to time while shooting your bow.

Cams are the workforce regulators of your bow. They control the string and cable(s), which all combine to get you to your bow’s peak draw weight at some point early in the draw cycle, and then drastically reduce that weight by 60-90 percent by the time you reach full draw.

cam9

2018 Lancaster Archery Classic Men’s Open Pro champ Paul Tedford

If you have a two-cam bow, it’s critical that both cams roll over in sync with one another. If one reaches full rotation before the other, then your pull at full draw will be uneven. Cams have stops built into them, which are designed to hit a cable or limb when the cam reaches its full rotation. They “stop” the draw cycle at the appropriate point.

Imagine one cam reaching the draw stop before the other. Releasing from that point, one cam would rotate more than the other in sending the arrow down range. That’s going to affect the string’s interface with the arrow.

cam3

The draw stop on this cam is short of the cable at full draw.

cam4

Here is a draw stop touching the cable, meaning the cam has reached full rotation.

When you paper tune your bow, cams that are out of sync can cause tears that are unfixable by adjusting the arrow rest or nocking point. Fix the cam timing, and those holes should become perfect – assuming the arrow spine is correct for a given bow, and assuming the archer’s shooting form is solid.

Same goes for single-cam bows. It’s a myth that cam timing isn’t important on these bows. Manufacturers intend for their single cams to rotate a certain amount, from a specific starting point. If that rotation is off, then the cam’s performance will be off.

Single-cam bows usually have a timing mark that will let you see if the cam is properly timed. Often, it’s a hole in the cam. When the cam is timed properly, you should be able to look through the hole in the cam and see the cable perfectly centered in it.

cam7

Here is a piece of orange D-loop material stretched between two timing holes in the cam of this single-cam bow, and then extended straight out from those holes. You can tell the cam’s timing is right because the orange rope is parallel to the bowstring.

So how can you check the timing on your dual-cam bows? An easy way is to have a friend watch you draw and play close attention to the draw stops to see when they hit. This is somewhat imprecise, however, and it could be difficult to detect small differences in timing.

A better way to check is to use a draw board. This is a mechanical device that you set your bow on, so you can draw with a mechanical crank. With a draw board, you can slow the draw rate at full draw to closely inspect exactly when each draw stop hits home.

cam5

A compound bow on a draw board.

How do you fix timing issues? On a single-cam bow, you twist or untwist the cable on the cam until the cable sits properly in relation to the timing mark.

On dual cam bows, put twists in to the cable connected to the cam that hits the draw stop first. You can put in half twists or full twists to adjust the timing. Start out with small adjustments to figure out exactly what’s needed. Go back to the draw board after each adjustment to check your progress.

cam10

Twisting the cable of the cam that reaches full draw first on a dual-cam bow will fix timing problems.